Jolimark DP550, User Manual

Page: 61 / 64

DP550 User's Manual
- 57 -
B.5.8 Label
When you have to use label to print, please having enough tests to ensure there is no problem
before using it.
Cover a layer of paperboard on the single layer tractor paper, then stick the paper with label
(surface base paper), this is label. With the temperature change of label and paperboard, the
shrinkage margin may reduce. Therefore, the paper should stick the whole page uniformly and
the glutinosity and wear should be good.
◆
Size
According to the size of tractor paper
Label size is more than 50mm in transverse direction and more than 25mm in vertical
direction.
◆ Paper quality
◆ Agglutinant
The viscosity of glue should accord with the peel strength above 10g/inch. Furthermore, when
the paper is crimped 180° as a 27 mm diameter cylinder, the label should tight enough and
will not peel from the paperboard.
This viscosity is a approximately standard, please use the paper which labels on it will not peel
when printing or paper feeding.
◆
About remove label attachment
Please not remove label attachment.
(Tearing off labels, please not remove the area out of label (attachment))
See the following Figure, the removal of attachment will lead to thickness margin of label. So
do not use it.
• Label Paper quality Good quality
Weight of each page paper 55 kg
Thickness Less than 0.1 mm
• Paperboard Paper quality Released paper
Thickness 0.06 ~ 0.08 mm
Caution: Please not use label cause it is not included in guarantee list. Problems
come out when using label, our company will not guarantee the device and
capability.
Paperboard
Label
Width/inch (25.4mm)
F ≧ 10g/inch