Jolimark DP550, User Manual

Page: 32 / 64

DP550 User's Manual
- 28 -
LED
blink simultaneously twice with two beeps, and then the
POWER LED
will be on.
Caution: When the top of form position is maximal, press LOAD/EJECT key, the printer will
not increase.
When the top of form position is minimal, press LF/FF key, the printer will not
decrease.
Note: To exit without saving, just turn the printer OFF.
4.6 Tear-off Adjustment Mode
There is a tear-off bar at the edge of the window cover. When you have finished printing, you can
advance the tractor paper on the tracker to the tear-off bar by the tear-off function to easily tear off
the perforated sheets. The tear off setting determines the distance between the perforation of
tractor paper and the tear-off bar.
Install tractor paper correctly, press
TEAR
key to feed paper to tear off position. With the printer
online, press both the
LOAD/EJECT
and
LF/FF
keys for about 3 seconds to get the printer to enter
the tear-off adjustment mode. When the printer enters this mode, the
ONLINE LED
and the
POWER LED
blink alternately.
Use the
LOAD/EJECT
and
LF/FF
keys to alter the tear-off setting:
LOAD/EJECT:
Press the
LOAD/EJECT
key to adjust the distance in 1/60 inch increments. You
can maximum increase to +15/60 inch
LF/FF:
Press the
LF/FF
key to adjust the distance in 1/60 inch decrements. You can maximum
decrease to 0/60 inch
To exit and save your new setting, press
ONLINE
key. The
POWER LED
and the
ONLINE LED
blink simultaneously for twice with two beeps, then the
POWER LED
turns on. Your new tear-off
setting value is saved.
Caution: When the tear off position is maximal, press LOAD/EJECT key, the printer will not
increase.
When the tear off position is minimal, press LF/FF key, the printer will not
decrease.
Note: To exit without saving, just turn off the printer.
4.7 Changing the Printing Settings
DP550 printers divide printer settings into three sections: LCD setting menu, Setup Menu System
and Online-aptitude Parameter Settings.
4.7.1 Using LCD Setting Menu
Press
ONLINE
key for about 3 seconds to enter LCD setting menu.
In LCD setting menu, press
LOAD/EJECT
key to switch the setting items, such as Bill, speed,
Copy and so on, the selected item blinks. Press
LF/FF
key to select the contents of the items,
such as Normal, High speed, super high speed and so on, the selected content is shown. Press
ONLINE
key to save and exit the LCD setting menu after setting the menu.
4.7.2 Using Setup Menu System
Print out the current settings as following steps:
1. Turn off the printer.
2. If you use tractor paper, please install the paper correctly. (The minimal width of tractor paper is
240 mm.)
3. Press down
LOAD/EJECT
key and
LF/FF
key simultaneously and turn on the printer. The printer