Jolimark BP-1000K (Model B), User Manual

Page: 24 / 44

BP-1000K User’s Manual
As the right picture show, the PRT-SPEED setting option which mark a “ √ ” is the current default
setting.
4) Press “ ▲ ”
，
“ ▼ ” for selection.
For example, if you need to change the speed to “super high speed”, you can press “ ▲ ” and “ ▼ ”
to choose that, then press “ ► II ” to save your selection. At the end of the option would mark a “ √ ”
after saving. (Show as follow picture)
2. High Speed √
3. Super High Speed
PRT-SPEED
2. High Speed
PRT-SPEED
3. Super High Speed √
► II
5) Press “ ◄ ” back to main menu, then press “ ◄ ” again exit the menu setting and the new setting will
take effect at the same time. (Show as follow picture)
1. PRT-SPEED ►
2. COPY ►
Menu setting
2. High Speed
PRT-SPEED
3. Super High Speed √
◄ ◄
Paper: Cut sheet _ _ _
4.4.2 Printing the Current Setting Report
If you need to know current setting, you can print the current setting report follow the steps:
1. Turn off the printer.
2. If use tractor paper, you should feed the paper on the tractor (optional) (the paper width must over
240mm).
3. Press both Load/Eject and LF/FF keys then turn on the printer, the printer will print out the
current setting report. (Show as figure 4-2)
- 20 -