BP-1000K
User’s Manual
Note
：
1. If the rated voltage and your outlet voltage do not match, contact your dealer for
assistance. Do not plug in the power cord.
2. You should use the properly grounded electrical outlet
2.7 Installing the Driver
After connecting the printer and the computer, turn it online and put the driver CD into the CD-ROM,
setting up the driver follow the way below:
Auto-install way
Double click the file “Setup.exe” in the driver disc, install driver by the following direction.
Note: Auto-install way just work in operating system of Windows2000 or above.
Hand-operated install way
The parallel cable installing steps for Windows 2000/XP/Vista are as follows
1. Click "Start"
→
"Settings", select "Printers".
2. Click “Add Printer", then it will show a window of "Add Printer Wizard", click "Next", then please
read the select direct carefully, Such as, select "Local printer” in the "Local or Network Printer"
window, then click "next".
3. Come out a window of "Select the Printer Port", select a usable port. Such as, select "LPT1: printer
port”, click "Next”.
4. Come out a window of "Manufacturers/Printers", click "Have Disk...".
5. Come out a window of "Install From Disk". Please according to the operating system environment,
you should select the path as follow: CD-ROM-"Driver"-"WIN2000 (XP-Vista-Win7)", that you can
find a file named: BP1000K.inf, click "Open", then click "OK”, click "Next".
6. Follow the direct click “Next" gradually till the installation is finished.
The parallel cable installing steps for Windows 7 are as follows
：
1. Click "Start"
→
"Devices and Printers".
2. Click "Add a printer", then it will show a window of "Add Printer", click "Add a local printer", and then
click "Next".
3. Come out a window of “Choose a printer port”, select “Use an existing port”, Such as, select “LPT1:
Printer Port”, click “Next".
4. Come out a window of "Manufacturers/Printers", click "Have Disk...".
5. Come out a window of "Install From Disk". Please according to the operating system environment,
you should select the path as follow: CD-ROM-"Driver"-"WIN2000 (XP-Vista-Win7)", where you can
find a file named: BP1000K.inf, click "Open", then click “OK" to return to the window of
"Manufacturers/Printers", click "Next".
6. Follow the direct click "Next" gradually till the installation is finished.
The USB interface installing steps for Windows 2000/XP/Vista/Win7 are as follows:
The following steps are used Windows XP as example. There are slight differences among different
operating systems.
1. Connect an USB cable and turn on the printer.
2. After the computer find out new hardware and finish searching, come out a window of "Add New
Hardware Wizard", click "Next".
3. Come out a window of "Add New Hardware Wizard"
-
"Windows operation", choose "Not Search, I
want to Choose the Setup Driver (D)", click "Next".
4. Come out a window of "Manufacturers/Printers", click "Have Disk...".
- 9 -
Summary of Contents for BP-1000K (Model B)
Page 1: ...User s Manual BP 1000K Model B...
Page 20: ...BP 1000K User s Manual Figure 3 8 Tearing the tractor paper 16...
Page 44: ......
