48 | minnkotamotors.com
©2018 Johnson Outdoors Marine Electronics, Inc.
UsING THe fOOT PeDal
Power
The Power Switch is located on the left
hand side
of the foot pedal
and used to turn the power on and off. The blue light next to the
Power icon
on the Indicator Panel is illuminated when the power
is on. Do not try to steer this motor with the foot pedal when
it
has lost power.
Motor Speed
The Speed Knob is located on the top right side of the Toe End of
the foot pedal. Turn the Speed Knob clockwise to increase speed and counter-clockwise to decrease speed. Speed can also be adjusted
using the remote.
Momentary Motor Operation
In Momentary Motor Operation, the propeller will only run while downward force is applied to the Momentary On Button. The Momentary
On Button is located on the top left Toe End of the foot pedal. Applying downward pressure to the Momentary On Button will turn the
propeller on. The motor will then run at the speed set by the Speed Knob. Removing downward force to the Momentary On Button will
turn the propeller off. No indicator light is associated with the Momentary On Button.
Constant Motor Operation
To switch to Constant Motor Operation, press the Constant On Button. The Constant On Button is located on the bottom left Heel End of
the foot pedal and is labeled on the foot pedal with a propeller symbol. In Constant mode, the propeller will continually run, regardless of
whether or not force is being applied to the Momentary On Button. While in Constant Motor Operation, the propeller will run continuously
at the speed set by the Speed Knob, or by the i-Pilot or i-Pilot Link remote. The green light next to the Constant On icon
on the
Indicator Panel will be lit when the motor is in Constant Motor Operation.
Spot-Lock
Constant On Button
Indicator Panel
Power Switch
Momentary On Button
Toe End
Heel End
Speed Knob
AutoPilot
NOTICE:
Remember to turn the power off when the
motor is not in use to prevent the motor from draining the
battery.
Indicator Panel
Spot-Lock
Constant On
Power
AutoPilot
CONTROLLING SPEED & STEERING WITH THE FOOT PEDAL
The foot pedal is used to operate the motor, and controls on the foot pedal are easy to operate by either foot or hand. The motor can also
be controlled by an i-Pilot or i-Pilot Link remote, as well as any compatible Minn Kota remote. Please refer to the i-Pilot, i-Pilot Link or
compatible remote manual on how the remote controls the motor.
