JOHNSON CONTROLS
10
FORM100.50-EG12 (918)
EVAPORATOR SECTION
Double Sloped Stainless Steel Drain Pan –
The Series 100’s stainless steel drain pan is
factory-mounted and installed on every unit. A condensate drain trap is needed, and must
be provided and installed in the field by others.
LD08022
NOTE
This is a visual reference only. Actual drain pan pitch will vary.
FIGURE 1 -
DRAIN PAN DETAIL
Double Wall Construction –
Double-wall construction is the standard construction of the
Series 100 and incorporates powder coated outer panels and corner post for maximum
exterior surface protection.
Factory Shrink-wrap –
All Series 100 single package units are shipped from the factory
with factory-fresh shrink-wrap packaging. No longer does the contractor need to worry
about dirt and debris clogging up condenser coils or moisture leaking into the air handler
on the units way to the job site or rigging yard.
Copper Fins –
For more extreme climates that aggressively can attack aluminum, cop-
per tube evaporator coils with copper fins are available. (This is not recommended for
units in areas where they may be exposed to acid rain or environments where ammonia
is present)
CONDENSER FEATURES AND OPTIONS
Scroll Compressors –
Reliable, efficient, trouble-free operation is the true measure of
a single package unit’s value. That’s why Johnson Controls Series 100 Single package
units use established scroll compressor technology to deliver dependable, economical
performance in a wide range of applications. With the Series 100 Single package units,
you get the latest generation of compressor enhancements added to the scroll’s inherent
strengths. The simplicity of a hermetic scroll compressor allows the use of fewer moving
parts to minimize breakdown.
Multiple Compressor Staging
– Through the use of the scroll compressor, the Series
100 has the ability to stage it’s cooling by enabling and disabling multiple single stage
compressors on multiple circuits.
Compressor Circuiting
– The Series 100 is designed so that only 2 scroll compressors
are in tandem within one refrigeration circuit. This means more reliable compressors,
and less equipment down time. With multiple circuits, if a compressor should ever fail on
one circuit, the other circuit/s will remain operational to maintain occupied loads. In sizes
70–105T, the Series 100 has three independent refrigeration circuits per unit.
Condenser Fan Motors
– The condenser fan motors used on the Series 100 unit are
Totally Enclosed Air Over (TEAO) to provide maximum durability through any season.
Features and Benefits (Cont'd)
