Chapter 3.0 The PowerSeries Pro Security System
3.3 Performing a Keypad and Siren test
LCD Display
1. Press [*][6] and enter the [Master Code] to access User
Functions.
Press (*) for <>
User Functions
2. Press [04] or use the scroll keys to navigate to System Test and
press [*]. All keypad sounders, bells/sirens and keypad LEDs
activate for two seconds.
Press (*) for <>
System Test
3. Press [#] to return to the Ready state.
3.4 Monitoring
This system is capable of transmitting alarms, troubles and emergency information. If an alarm
is initiated by mistake, immediately call the central station to prevent an unnecessary response.
Note:
The monitoring function must be enabled by the installer before it is operational.
Note:
Consult with the installer to determine if the system is configured with a communicator
delay. A communicator delay will prevent a report to the central station if the control panel is
unset within 30-45 seconds after an intrusion alarm is triggered. Note that fire-type alarms are
normally reported without a delay.
Note:
Ensure the installer verifies that the system is compatible with the Central Station
Receiver format at yearly intervals.
- 7 -
