VPN/DSL Security Option
Configuration
24-10618-155 Rev. A
2-13
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
Resetting the NetScreen-5XT Router
If necessary, the NetScreen-5XT router can be reset to its default settings in one of
two ways:
Using Command Line Interface (CLI) Commands
Pressing the Asset Recovery Button
For detailed information on resetting the NetScreen-5XT router to its default
settings, refer to the manufacturer’s documentation.
Linksys BEFVP41 Router Installation and Configuration
This section describes how to install and configure the Linksys BEFVP41 router.
Figure 2-6: Linksys BEFVP41 Back End Router Installation
Linksys BEFVP41 Installation
The Linksys BEFVP41 router may only be used as the back end router. All
connections to the Linksys BEFVP41 router are made to the device’s rear panel.
To install the BEFVP41 router:
1. Connect the power adapter to the rear panel of the Linksys BEFVP41.
2. Connect a network cable from a laptop or PC to one of the Linksys
BEFVP41’s available Ports 1-4. This connection will be used to configure the
router’s settings.
3. Connect a network cable from the P2000 Server to one of the available Ports
1-4 of the router. See Figure 2-6.
Laptop or PC
Ethernet
Used for Configuration
Purposes Only
P2000 Server
(Rear View)
Ethernet
WAN
Linksys BEFVP41 Back End Router
1
2
3
4
POWER
Reset
II X
WAN
Summary of Contents for P2000
Page 2: ......
