VPN/DSL Security Option
Configuration
24-10618-155 Rev. A
2-17
This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.
3. Enter
admin
in the
Password
field and leave the
User Name
field blank.
Click
OK
.
4. On the Linksys Setup window, click the
VPN
tab.
On the VPN tab:
1. Select the
Enable
radio button next to This Tunnel.
2. Enter a
Tunnel Name
. This name should be unique for this particular tunnel.
3. Verify that
Subnet
is the option selected from the
Local Secure Group
field.
Verify also that the
IP Address
is
192.168.1.0
4. Select
Subnet
from the
Remote Secure Group
field.
5. Enter the
IP Address Subnet ID
in the IP field. This would be the IP Address
of the remote endpoint on the other side of the tunnel (for example,
200.0.0.0
).
6. Select
IP Address
from the
Remote Security Gateway
field and enter
201.0.0.1
as the IP address.
7. Select
3DES
for Encryption and
SHA
for Authentication.
8. Select the
PFS (Perfect Forward Secrecy)
check box and verify that
master
is entered in the
Pre-shared Key
field.
9. Click the
Connect
button to establish a connection.
10. Verify that the
Status
indicates that the Router is
Connected
.
Summary of Contents for P2000
Page 2: ......
