manualshive.com logo in svg

Johnson Controls P2000, Installation Manual

Share
Download
Johnson Controls P2000 Installation Manual Download Page 17

VPN/DSL Security Option

Configuration

24-10618-155 Rev. A

  

 

2-5

This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.

NetScreen-5XT Router Installation and Configuration

This section describes how to install and configure the NetScreen-5XT router.

Figure 2-4: NetScreen-5XT Back End Installation

NetScreen-5XT Installation

The NetScreen-5XT router may be used as the front end router, back end router, or 
both.

To install the NetScreen-5XT router:

1. Connect the power adapter to the rear panel of the NetScreen-5XT.

The NetScreen-5XT device runs a 100-240 VAC +/- 10% and 12 watts. When 
properly connected to an AC power source, the power LED on the faceplate 
illuminates solid green. When power fails, the power LED turns off.

2. Connect a network cable from a laptop or PC to one of the NetScreen-5XT’s 

available 

Trusted

 ports.

This connection will be used to configure the NetScreen’s settings.

3.

Back End Installation: 

Connect a network cable from the P2000 Server to a 

Trusted

 port of the NetScreen-5XT router. See Figure 2-4.

Laptop or PC

UNTRUSTED

NetScreen-5XT Back End Router

Ethernet

TRUSTED

4

3

2

1

DC POWER

CONSOLE MODEM

Used for Configuration 

Purposes Only

P2000 Server

(Rear View)

Ethernet

WAN

Summary of Contents for P2000





































Reviews:

No comments

Brands by name

Popular brands

Load more brands