manualshive.com logo in svg

Johnson Controls P2000, Installation Manual

Share
Download
Johnson Controls P2000 Installation Manual Download Page 9

T A B L E   O F   C O N T E N T S

24-10618-155 Rev. A

vii

This document contains confidential and proprietary information of Johnson Controls, Inc.
© 2012 Johnson Controls, Inc.

Chapter 1: Introduction

Chapter Summaries ................................................................................................................................. 1-1
Manual Conventions ................................................................................................................................ 1-1

Chapter 2: Configuration

IPSEC Parameters................................................................................................................................... 2-1

P2000 Server IP Address................................................................................................................. 2-1
VPN Router WAN IP Address.......................................................................................................... 2-1
VPN Router LAN IP Address ........................................................................................................... 2-2

Hardware Installation and Configuration.................................................................................................. 2-2

P2000 Server to Back End Router Connection................................................................................ 2-4
NetScreen-5XT Router Installation and Configuration..................................................................... 2-5

NetScreen-5XT Installation ...................................................................................................... 2-5
NetScreen-5XT Configuration .................................................................................................. 2-6
Resetting the NetScreen-5XT Router .................................................................................... 2-13

Linksys BEFVP41 Router Installation and Configuration............................................................... 2-13

Linksys BEFVP41 Installation ................................................................................................ 2-13
Linksys BEFVP41 Configuration ............................................................................................ 2-14

Linksys BEFSX41 Router Installation and Configuration............................................................... 2-15

Linksys BEFSX41 Installation ................................................................................................ 2-15
Linksys BEFSX41 Configuration ............................................................................................ 2-16
Resetting the Linksys Router ................................................................................................. 2-18

Installing the Digi EtherLite Device (S320 Connection Only)......................................................... 2-18
Installing the Digi One® SP (S321 Connection Only) .................................................................... 2-19

Appendix A: Glossary

Summary of Contents for P2000





































Reviews:

No comments

Brands by name

Popular brands

Load more brands