Johnson Controls IFI-WS Page 38 Installation And Operation Manual Download | Manualshive

Page: 38 / 75

background image

Workstation Settings

Workstation Settings

38

IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014

4.2 Workstation Settings

The workstation settings described in this section are available from the Configure > Options menu. These settings
apply only to the local workstation.

4.2.1 Options Window Command Buttons

On-screen command buttons common to the Options window tabs are described in

.

4.2.2 General Tab

The General tab allows the Administrator to configure overall settings for workstation operations as described in

Table 4.2 Options Window Command Buttons

Button

Description

Apply

Saves the settings, but keeps the Options window open.

OK

Saves the settings and closes the Options window.

Cancel

Closes the Options window without saving settings.

Table 4.3 General Tab Settings

Setting

Possible Settings

Description

Comments

Event Label:

The event label is displayed in the event list when the point is in an off normal condition. The event label consists of a
combination of network, node, and point labels as described below.

Network Label

Network Alias

Display the user-defined description of the network.

None

Do not display the assigned network alias.

Node Label

Node Alias

Display the user-defined description of the node.

Node Number

Display the system assigned node number.

None

Do not display the assigned node alias or number.

Point Label

Point Alias

Display the user-defined description of the point.

Point Number

Display the system assigned point number.

None

Do not display the assigned point alias or number.

Icon Label:

The icon label is displayed below the icon on the graphics screen. Icon label options are described below.

Event Label

Display the event label as described above.

Description

Display the point description programmed into the FACP.

None

Display nothing.

History Backup:

The external backup file is named with the date: YYYMMDD.HIS. History backup options are described below.

Number of days before
performing history
backup

Disabled

Do not back up history.

1 - 62

Interval in days that history backup is performed.

Number of days to
keep in history
following backup

0 - 30

Length of time in days to retain a history backup.

Check Boxes:

Options selectable via check boxes are described below.

«
...
36
37
38
39
40
...
»

Summary of Contents for IFI-WS












































































Reviews:

No comments

Related manuals for IFI-WS

Gemini GEM-X255

Brand: NAPCO Pages: 40

Brand: NAPCO Pages: 16

Brand: NAPCO Pages: 6

Brand: ZKTeco Pages: 16

Brand: Digital Watchdog Pages: 2

Brand: Rainbow Pages: 26

FireClass FC400H

Brand: Bentel Pages: 4

Exubera Pro UC EV9333-50

Brand: Everpure Pages: 2

IP Surveillance

Brand: Vivotek Pages: 73

Medialon MAS Pro Dante D

Brand: 7th Sense Pages: 2

Brand: Adamson Systems Engineering Pages: 12

Brand: Miller Pages: 40

Brand: Zumimall Pages: 24

Brand: Q-See Pages: 9

NVIP-5DN3615AV/IR-1P/F

Brand: Novus Pages: 45

Brand: Vonyx Pages: 16

Brand: auna multimedia Pages: 17

Brand: ESAB Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands