manualshive.com logo in svg

Johnson Controls IFI-WS, Installation And Operation Manual, Page: 11 / 75

Share
Download
Johnson Controls IFI-WS Installation And Operation Manual Download Page 11

Printer Overview

Product Overview

11

IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A  12/11/2014

1.5 Printer Overview

The print option appears in the File menu only if the workstation detects a Windows-compatible printer has 
been installed. When a printer is initially added in Windows

®

, the workstation must be restarted so it can 

detect the printer.

The workstation software application supports graphics printing and event printing. Windows-compatible 
printers are required in order to print screens, floor plans, history reports, etc. and annunciated workstation 
events.

1.5.1 Graphics Printer

A graphics printer is a Windows-compatible printer that prints what is currently displayed on the 
workstation’s monitor. When installing graphics printer drivers, be sure to disable bidirectional support and 
set the graphics mode to raster.

1.5.2 Local Event Printer

The optional local event printer is a UL 864-listed, Windows-compatible, dot-matrix printer that prints all 
workstation events. A default output format and monitoring profile are preconfigured for a local event 
printer. It is only necessary to enable the printer in Windows.

A local event printer must have a buffer size of at least 32K and be able to set to these settings:

•

Baud Rate: 9600 

•

Parity: None

•

Data Bits: 1 Stop Bit

•

Stop Bits: 8 Bits

The JPRN-6 printer is a UL listed printer and can be used as a local event printer.

Summary of Contents for IFI-WS












































































Reviews:

No comments