manualshive.com logo in svg

Johnson Controls IFI-WS, Installation And Operation Manual, Page: 54 / 75

Share
Download
Johnson Controls IFI-WS Installation And Operation Manual Download Page 54

Operation

Graphics Display Screen

54

IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A  12/11/2014

Table 5.2  Default Node/Point Control Commands

Command

Description

Enter User Response

Allows the user to select from a list of default or user-created responses. These 
options provide the user the means to report various conditions and operations 
related to a node/point. Default responses are as follows:

• Dispatched Personnel To Investigate
• Response Personnel on Scene
• Device Undergoing Test
• Device Testing Completed
• Contacted System Contractor
• Faulty Device
• Replaced Device
• Preventative Maintenance

History Of Device

Only displays the history information in the History Manager window for the 
selected node/point.

Linked Media

Accesses any media that has been created and then assigned to the node/point. 
Several types of media files may be linked to the node/point. One of each type can 
be used.

• A text file to give specific information or instructions to the User (.TXT).
• A raster image type graphic can be linked (.BMP).
• A sound file may be linked giving audible information or instructions (.WAV).
• A video file may be linked (.AVI).

Summary of Contents for IFI-WS












































































Reviews:

No comments