25
IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Section 3 Configuration Tool Settings
3.1 Administrator Login
An Administrator must log into the workstation before networks can be connected or configured as follows:
1.
Start the workstation if it is not already running. For more information, refer to
2.
Click
File > Login
. The User Login dialog box appears.
3.
Click
Admin
.
4.
Enter the password, and then click
OK
.
5.
It is highly recommended that the master user change the factory defined master account password to secure
the workstation.
Intelligent Fire Integrator Configuration Tool Installation & Operation Manual
(P/N
53380)
for additional information.
3.2 Factory Defined User Profiles and their Passwords
The user must log into the workstation before any of its settings can be configured. An Administrator needs to log in
to change an existing user’s password or to add a user and their password. The factory defined user “Admin” has such
a security option.
The workstation software application’s factory defined Administrator’s password is “admin”. The factory defined
Administrator profile cannot be deleted.
3.3 Configuration Tool
3.3.1 Overview
The configuration tool is used to customize the workstation’s graphical user interface (GUI) to display the building’s
facilities monitoring system. An authorized event responder uses the customized GUI to identify the location of, and
respond to, an annunciated event. After modifying a workstation GUI design with the configuration tool, it must be
verified to be correctly displayed.
3.3.2 Starting and Exiting the Configuration Tool
Start the configuration tool on the workstation using one of the following methods:
• In the workstation application, go to
Configure > Launch Configuration Tool
.
• From Windows, go to
Start > Programs > Facilities Monitoring > Configuration Tool
and click the
Use
System Database
icon.
Exit the configuration tool by clicking the
Exit
icon.
