background image

 JCI FMS-1655R 
Remote Display

 JCI CMS-1655

Central Monitoring Station

 JCI FMS-1655

The Next Generation in Critical Airflow Controls 

FMS-1655 Room Pressure Remote Display 

Installation and Programming Manual 

LB-FMS1655-RS 

LB-FMS1655-RT

Code No. LIT-12013124 Rev. A

Issued August 2018

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference 

when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause 

harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful 

interference, in which case users will be required to correct the interference at their own expense.

Application

These installation instructions guide the installer through the installation of the FMS-1655 Room Pressure Remote 

Display. Please read these instructions thoroughly before beginning installation.

North American Emissions Compliance

United States

Canada

Installation

This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment 

Regulations.

Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du 

Canada.

Risk of Property Damage.

 

Ensure that the power source conforms to the requirements of the equipment. Failure to use a correct power 

source may result in permanent damage to the equipment.

Risque de dégâts matériels.

 

S’assurer que la source d’alimentation électrique est conforme aux spécifications de l’équipement. L’utilisation 

d’une source d’alimentation électrique inappropriée risque d’endommager irrémédiablement l’équipement.

NOTICE

NOTICE

IMPORTANT

The FMS-1655 Room Pressure Remote Display must be wired to 24 VAC only. Wiring the unit to 

110 VAC will cause serious damange and void the warranty. 

Use of the software that is in (or constitutes) this product or access to the cloud or hosted services applicable to this product, 

if any, is subject to applicable terms set forth at www.johnsoncontrols.com/techterms.  Your use of this product constitutes an 

agreement to such terms.  If you do not agree to be bound by such terms, you may return the unused product to your place of 

purchase

.

Summary of Contents for FMS-1655 Series




















Reviews: