Johnson Controls CICS015B21S, Engineering Manual

Page: 11 / 72

FEATURES
TC-18004-rev.2
1-3
● Installation to High Ceiling
The airflow volume setting functions are equipped as “HIGH2, HIGH, MED and LOW”.
The high speed mode (High Speed 1 and 2) setting from wired controller adopted to high ceiling
installation.
[ Airflow Volume ]
HIGH 2
HIGH
MED
LOW
● Adding Optional Receiver Kit (CSIRK01)
“HIGH 2” control is available from the wireless controller (CIR01).
To use the wired controller together, it can be connected to the motion sensor kit.
The motion sensor can be set and controlled only from the wired controller.
NOTE:
If the high speed 2 setting (02) is selected from the remote control switch, the airflow volume of “HIGH 2”
and “HIGH” will be equaled as shown in the table.
Because the airflow volume, “HIGH 2”, and “HIGH” are used as “HH2” in high speed 2 setting.
High Speed Mode (C5)
Airflow Volume Mode
HIGH 2 HIGH MED LOW
Standard
(00)
HH2 Hi Me Lo
High Speed 1
*1
(01)
HH2 HH1 Hi Me
High Speed 2
*2
(02)
HH2 HH2 HH1 Hi
*1) Setting For High C Standard Air Filter
*2) Setting For Air Filter (Optional)
Supported Ceiling Height
High Speed Mode
(C5)
Airflow Volume
Mode
15 and 24 MBH 30 and 36 MBH
Standard
(00)
HIGH 2
11.5 ft.
(3.5m)
14.1 ft.
(4.3m)