manualshive.com logo in svg

Johnson Controls CIC1006B21S, Engineering Manual

Share
Download
Johnson Controls CIC1006B21S Engineering Manual Download Page 22

1-WAY CASSETTE

2-10 

TC-18002

2.11.2  Standard Operation Sequence

I.U.:  Indoor Unit

Auto Cooling/Heating

Operation

I.U. Air

Intake

Temp.

I.U. Air

Intake

Temp.

< Set Temp.

< Set Temp.

> Set Temp.

> Set Temp.

> Set Temp.

> Set Temp. + 1

o

F

 

(0.5

o

C)

> Set Temp. + 3

o

F

 

(2

o

C)

< Set Temp. - 3

o

F

 

(2

o

C)

< Set Temp. - 1

o

F 

 

(0.5

o

C)

Heating

Mode

Cooling

Mode

I.U. Air

Intake

Temp.

Fan

Mode

Fan

Mode

I.U. Air

Intake

Temp.

I.U. Air

Intake

Temp.

< Set Temp.

■  Cooling Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

■  Dry Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

■  Heating Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

■  Automatic Cooling and Heating Operation

It is applicable only for the Heat Recovery System.

■  Defrosting Operation

The sequence may be different depending on the outdoor unit model to be connected.  Refer to the “Outdoor 

Unit Engineering Manual” for details.

Summary of Contents for CIC1006B21S



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands