Johnson Controls CIC1006B21S, Engineering Manual

Page: 12 / 50

FEATURES
1-4
TC-18002
(1) By adding the motion sensor on the corner of the decorative panel, air conditioning capacity is saved
automatically depending on the amount of detection of human activity. In addition, the operation can
be stopped automatically if activity is absent and continues for more than 30 minutes.* The motion
sensor allows for continuation of a comfortable indoor environment while eliminating unnecessary
operation.
* The default setting is “Continuous Running”. However, “Automatic Stop” can be selected using
the wired controller.
(2) Detection Area (For a ceiling height of 9 ft. (2.8m))
Detecting Diameter: Approx. 23 ft. (7m) (2.6ft (0.8m) from floor surface)
Ceiling Height
8.9ft (2.7m)
In case the ceiling height is 8.9ft (2.7m).
< Viewed from Top >
Unit
23ft (7m)
23ft (7m)
2.6ft (0.8m)
From Floor Surface
Detecting Area
23ft
(7m)
23ft(7m)
Non-Detecting
Are
a
NOTE:

The motion sensor detects human activity. However, if someone is in a room with very little activity, the
motion sensors may not detect motion.

The motion sensor may detect human activity if the indoor unit with the motion sensor is installed near a
moving object which has a temperature different than the environment.

The motion sensors may detect an absence of activity if the indoor unit is installed on a high ceiling of
13 ft. (4m) or more if fingerprints or contaminants are on the motion sensors’ lenses, even if someone is in
a room.

Make sure to operate the motion sensor with a wired controller.

This cannot be used with a wireless controller alone.
● Motion Sensor Kit (Optional Part)