Johnson Controls CIC1006B21S, Engineering Manual

Page: 10 / 50

FEATURES
1-2
TC-18002
● Flexible Design
(1) Ability to choose from three installation types
• Corner Type (Standard)
It is possible to install the unit closer to the wall side of the
ceiling.
No interference with ceiling equipment such as lighting, and
assists in providing additional space for ceiling equipment.
• Clipped Ceiling for 1-Way Discharge Type (Optional)
It is suitable if requirements are not to embed the unit directly
into the ceiling because of ceiling equipment.
• Clipped Ceiling for 2-Way Discharge Type (Optional)
Discharged air is discharged horizontally from the front air
outlet and downward from the lower air outlet for wide air
distribution.
(2) Flexibility of installation on a high ceiling
If the unit is installed on a high ceiling, use the high speed function to select the airflow volume which
is higher than the normal airflow volume.
Set High Speed using the wired controller depending on the ceiling height as shown in the table
below.
● Slim and Stylish Design
The unit height is only 9-1/4 inches (235mm).
It can be installed at a small installation height such as a clipped
ceiling.
Decorative panel design is simple and stylish.
The shutter function closes the air outlet with the louver when
the operation is stopped.
● Highly-Advanced Low Sound Pressure Level
By improving the fan wing shape and air outlet design, there is
highly improved efficiency of the airflow operation and lower sound
pressure level.
NOTE:
Not suitable for installing on a high ceiling as the heated air has difficulty reaching the floor.
NOTE:
As for 2-Way Discharge Type, air reaching distance is shorter than 1-Way Discharged Type.
When installing, make sure that ceiling height is within 8.9 ft. (2.7m)
Ceiling Height
High Speed
Setting Function
(H,Y,C)IC1006B21S
(H,Y,C)IC1008B21S
(H,Y,C)IC1012B21S
(H,Y,C)IC1015B21S
Less than 9 ft. (2.7m) Less than 10 ft. (3.1m) Standard
9 ft. to 10 ft. (2.7 - 3.0m) 10 ft. to 12 ft. (3.1 - 3.5m) High Speed
Fan Casing
Fan Runner