Johnson & Starley WARMCAIR C26D, Installation, Commissioning & Servicing Instructions

Page: 4 / 44

www.johnsonandstarley.co.uk 4
1. FEATURES
Appliance Classification:
The WarmCair C26D has been tested
and CE certified by BSI Ltd for use with
NATURAL gas G20.
FEATURES
1. Flue Adapter
2. Combustion Measuring Point
3. Time Control
4. PCB Control Wiring Panel
5. Sliding Flue Connector
6. Flue Collector Box
7. Flue Sensor
8. Condense Outlet
9. Inspection Glass
10. Condense Trap Assembly
11. Condensing Pump Outlet Pipe Hose
12. Condense Pump
13. Duct Temperature Sensor
14. Gas Cock
15. ESYS
16. Gas Valve
17. Ignition & Detection Electrode Leads
18. High Limit Temperature Sensor
19. Combustion Air fan Assembly
20 Return Air Sensor
21. Fan Failure Sensor
22. Air Circulation Fan
23. MMI Control Panel
24. Return Air Filter
2. GENERAL DESCRIPTION
2.1 The WarmCair C26D is a highly efficient condensing gas-fired downflow forced convection air heater.
Significant reductions in Low Carbon and NOx emissions are achieved.
It has been designed to provide the user with on demand Warm Air Central Heating. Using sophisticated
controls enabling it to provide the precise amount of heat output to match demand. It is room sealed, with a
stainless steel heat exchanger, using a vertical or horizontal Concentric Flue System.
The WarmCair C26D air heater is ideally suited for new built dwellings and the replacement of existing non-
condensing air heaters.
2.2 The air heater output modulates 22.88 kW (82.37 MJ/h, 78,066 Btu/h) down to 7.04 kW (25.34 MJ/h, 24,020
Btu/h) “Summer Air Circulation” of unheated air is available by manual selection (see the User’s Instructions).
FIGURE 1. C26D FEATURES
15
14
18
16
17
20
21
22
23
24
13
1
2
4
5
7
9
10
12
11
8
6
3
19