When you turn off the oven, the
function also turns off.
Set + Go
The function lets you set a heating function (or a
programme) and use it later with one press of
any symbol.
1. Turn on the oven.
2. Set a heating function.
3. Press
again and again until the display
shows: Duration.
4. Set the time.
5. Press
again and again until the display
shows: Set + Go.
6. Press
to confirm.
Press any symbol (except for ) to start the
function: Set + Go. The set heating function
starts.
When the heating function ends, a signal sounds.
• Function Lock is on when the
heating function works.
• The menu: Basic Settings lets you
turn the function: Set + Go on
and off.
Automatic Switch-Off
For safety reasons the oven turns off
automatically after some time, if a heating
function works and you do not change any
settings.
(°C)
(h)
30 - 115
12.5
120 - 195
8.5
200 - 245
5.5
250 - maximum
3
The Automatic Switch-off does not work with
the functions: Light, Food Sensor, Duration, End
Time.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the oven is turned off,
the brightness of the display is lower between
10 PM and 6 AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the night
brightness (apart from ON / OFF), the
display goes back to the day brightness
mode for the next 10 seconds.
– if the oven is turned off and you set the
function: Minute Minder. When the
function ends, the display goes back to the
night brightness.
Cooling fan
When the oven operates, the cooling fan turns
on automatically to keep the surfaces of the
oven cool. If you turn off the oven, the cooling
fan can continue to operate until the oven cools
down.
Oven User Manual
29
