John Lewis JLBIOS625, User Manual

Page: 20 / 60

Clock functions
Clock functions table
Clock function Application
Minute Minder To set a countdown (max. 2 h 30 min). This function
has no effect on the operation of the appliance.
Use to activate the function. Press
or to set
the minutes and to start.
Duration To set the length of an operation (max. 23 h 59 min).
End Time To set the switch-off time for a heating function (max.
23 h 59 min).
If you set the time for a clock function, the time
starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the appliance
deactivates the heating elements
after 90 % of the set time. The
appliance uses the residual heat to
continue the cooking process until
the time ends (3 - 20 minutes).
Setting the clock functions
Before you use the functions:
Duration, End Time, you must set a
heating function and temperature
first. The appliance deactivates
automatically.
You can use the functions:
Duration and End Time at the same
time if you want to automatically
activate and deactivate the
appliance on a given time later.
1. Set a heating function.
2. Press again and again until the display
shows the necessary clock function and the
related symbol.
3. Press or to set the necessary time.
4. Press to confirm.
When the time ends, an acoustic signal sounds.
The appliance deactivates. The display shows a
message.
5. Press any symbol to stop the signal.
Heat + Hold
Conditions for the function:
• The set temperature is more than 80 °C.
• The function: Duration is set.
The function: Heat + Hold keeps prepared food
warm at 80 °C for 30 minutes. It activates after
the baking or roasting procedure ends.
You can activate or deactivate the function in
the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
Steam oven User Manual 20