John Lewis JLBIOS625, User Manual

Page: 18 / 60

Warning! Wait a minimum of
60 minutes after each use of
the steam cooking in order to
prevent hot water from
exiting the water outlet valve.
Tank Empty indicator
The display shows: Water required and an
acoustic signal sounds when the tank is empty
and must be refilled.
For more information refer to "Steam Cooking".
Tank Full indicator
When the display shows: Water tank full, you
can use the steam cooking.
An acoustic signal sounds when the tank is full.
If you put too much water into the
tank, the safety outlet moves the
excess water to the bottom of the
oven.
Remove the water with a sponge
or cloth.
Emptying the water tank
Caution! Make sure that the
appliance is cool before you
start to empty the water
tank.
Empty the water tank after each steam cooking.
1. Prepare the draining pipe (C), included in the
same package with the user manual. Put the
connector (B) onto one of the ends of the
draining pipe.
B
C
A
2. Put the second end of the draining pipe (C)
into a container. Put it at a lower position than
the outlet valve (A).
3. Open the oven door and put the connector
(B) into the outlet valve (A).
4. Push the connector again and again when you
empty the water tank.
The tank can have some water
when the display shows: Water
required.
Wait until the water flow from
the water outlet valve stops.
5. Remove the connector from the valve when
the water stops flowing.
Do not use the drained water to fill
the water tank again.
Heat-up indicator
When you activate a heating function, the bar
on the display comes on. The bar shows that
the temperature increases. When temperature
is reached the buzzer sounds 3 times and the
bar flashes and then disappears.
Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven when
the Fast heat up function operates.
Steam oven User Manual 18