2x 3,5x25
Electrical Installation
• Enquiries regarding the installation of the
cooker point, if required, should be made to
your Regional Electricity Company to ensure
compliance with their regulations.
• The appliance socket switch should be
outside the cabinet but within 2m of the
appliance to make it accessible to switch off
the appliance in case of an emergency.
• To protect the hands, wear gloves when
lifting the oven into its housing.
Important! HOUSE CIRCUIT
Earth leakage and continuity tests must
be carried out before the appliance is
connected to the mains supply and re-
checked after fitting.
GETTING THINGS READY CHOICE
OF ELECTRICAL CONNECTION
There are three possible ways to connect your
appliance. In each case the appliance should be
operated using at least 6mm² twin core and
earth PVC insulated multicore cable. Please
choose from the most appropriate after reading
the different methods :
a) By connecting to a cooker point (having a
double pole isolating switch with at least
3mm contact separation in all poles and
neutral) and protected with a fuse or
miniature circuit breaker at your mains fuse
box.
b) By connecting the appliance together with a
hob directly to a cooker point(s). Having a
double pole isolating switch with at least
3mm contact separation in all poles and
neutral.
c) If you wish to connect an oven and a hob to
a cooker point you can by connecting the
oven and hob separately to the cooker
point. Oven and hob units should be
separately connected to a cooker point.
(See Picture)
42
Built in double oven user manual
