VECTOR SYNTHESIS (VECTOR) |
17
control. (Negative amounts increase the level from -1 to
-63, but with the phase inverted.)
Switching the display by using the Vector button (next
to Mixer) shows the X/Y pad, with the mixer controlled
by the small gray dot. Grabbing this with the mouse will
move the mix accordingly, from corner to corner, etc.
When you move the gray dot, you will see the 2 sliders
(X and Y) move concurrently. If you want to control the
Vector Mix with some external MIDI controls, just right-
click over each slider to assign a Midi Controller value.
(Save your MIDI Controller settings in the special “MIDI
Controler” bank of your Solaris preset list.)
You can also modulate either axis from the standard list
of modulation sources. There is one modulation path
for each axis (X and Y). The white dot is not selectable,
and only functions to show the position of the mix when
modulation is applied.
