JLG X13JP-X370AJ, Service And Maintenance Manual, Page: 59 / 137

SECTION 4 - BOOM & PLATFORM
4-6
3121774
4.4 SKYGUARD INSTALLATION - ONE PERSON
PLATFORM
The purpose of this instruction is to install a SkyGuard sys-
tem on JLG Compact Crawler Boom (platform capacity of
one person) models listed below and with below pictured
SkyGuard Bracket.
It is recommended that you read and thoroughly under-
stand these instructions before starting this procedure.
NOTICE
USE ALL APPLICABLE SAFETY PRECAUTIONS WHILE WORKING ON,
AROUND OR UNDER ANY MACHINERY.
Options/Accessories Prohibited When Installing
This Kit:
•
None
Tools & Equipment Required:
•
Standard mechanic tools including 5/16 in. & 7/32 in.
Allen Wrenches
•
Tie Straps
Personnel Required:
•
Qualified JLG equipment mechanic
Parts List:
Procedure:
1.
Park the machine on the firm level surface, fully
retract & lower the boom.
2.
Extend all the four outriggers, set them to the
auto levelling mode and set the machine to rest
position.
3.
Remove the key and shut the engine OFF.
4.
Allow the machine and system fluids to cool.
5.
Disconnect the battery power from the machine.
Figure 4-9. SkyGuard Bracket with Mount
ITEM
PART
NUMBER
DESCRIPTION QTY
1 0641414 Bolt, 1/4-20 x 1 3/4 LG 2
2 0700812 Bolt (Metric), 8 x 25 LG 4
3 3290801 Nut, M8 x 1.25 4
4 3300430 Nut, Acorn 1/4- 20 2
5 3931424 Bolt, 1/4-20x1 1/2 LG 2
6 4711400 Washer, 1/4 DIA Plain Steel, Narrow 4
7 4811902 Washer, 8mm LG OD 4
8 37675400 Bracket, SkyGuard Support 1
9 1001186517 Cover, Platform Sensor 2
10 1001188889 Support, Shear Block 2
11 1001213890 Switch, SkyGuard 1
12 1001213891 Mount, Platform Sensor 1
Go
to
Discount-Equipment.com
to
order
your
parts