SECTION 6 - JLG CONTROL SYSTEM
6-2
3121774
6.2
PLATFORM - REMOTE CONTROL STATION
Figure 6-1. Remote Control
Turning on the machine and within the operation, the
main LCD display screen (Figure 6.1) is activated. There are
eight (8) display positions which indicate machine status
during various stages of operation.
The remote control is made up of buttons, joysticks, a key
selector switch and a display.
The display is used to view the status of the machine and
the operating information necessary or useful for the
operator.
When the machine's main control board is powered, the
data are continually sharing between the ECM1 and
remote control through the ECM3.
NOTE:
Disconnected the remote control only with machine
OFF.
Replacing the remote control, the ECM1 board or flashing
software, starting machine ON for the first time, the data
exchange could take almost one to ten minutes (depend-
ing of the software remote control release).
Go to
Discount-Equipment.com
to
order your
parts