MACHINE OPERATION
Section 1
Page 1-18
1001206598
METRO-MH
Setting Controller Parameters
After the controller powers up,
Press
, then
select
1 Set Parameters,
then
Press
again to advanced parameter
password confirmation interface.
Press
and
to increase or
decrease values to enter the correct
password 0~9;
Press
to move right, entering the
password number for all 4 positions.
Press
key to save password.
(Factory default password is
1234
and
users can modify it via PC connection.)
Press
key and
key to scroll
screen; select parameter you want to
configure and Press
key (the
parameter will highlight with black),
Press
key or
key to change
parameter value,
Press
key to confirm setting and the
set value will be saved into internal FLASH
Date and Time Setting:
After controller powers up, Press
,
then select
3 Time Calibration,
Press
again to the Date and Time
Setting interface. The first line is current
date and time and the second line is the
time information of user’s modification.
Press
key or
key to increase or
decrease the value.
Press
key to confirm setting and the
bit will right move automatically. Number
“5” in the parenthesis is the week
information. It is set by the microprocessor
based on current date, so the user does
not need to modify it.
If the controller remains inactive for more
than ten (10) minutes, the controller will
switch to the “power-save” mode (the
controller screen turns-off).
To return from the ”power-save” mode,
press for ten (10) seconds.
Parameter Setting
01 Timer Start
Start Time Duration
18:50 08:30
Date and Time
Current Time:
13-01-04 (5) 08:27:55
13-01-04 (5) 08:27:23