JLG METRO-MH, Operation And Safety Manual, Page: 14 / 29

MACHINE CONTROLS
Section 1 Page 1-10 1001206598
METRO-MH
OPTIONAL METRO-MH MODULE
AUTO-START INSTRUCTIONS
1. Complete all lighting tower operating
safety checks.
2. Switch battery and engine starter
isolators
to “on” and check that the
emergency stop button is released.
3. Press the Auto button on the MH
controller to show the AUTO MODE
SELECT screen.
4. Use the UP and DOWN ARROWS to
scroll to 01 AUTO TIMER MODE.
Press the MENU/CONFIRM button.
5. Scroll to 03 TIMER SET using the UP
or DOWN arrows.
6. Press MENU/CONFIRM to open the
Timer Running Action screen.
7. Scroll with the DOWN ARROW to 02
AUTO RUN TIMER screen.
Press the MENU/CONFIRM button.
8. Set the starting time using the UP and
DOWN
arrow buttons to
change the numbers in each digit
place. To enter the next digit place,
press MENU/CONFIRM.
9.
Set the required “Duration” period of
operation, then press MENU/CONFIRM
until the cursor disappears.
10. Press the STOP button to return to
the home screen.