MACHINE CONTROLS
Section 1
Page 1-7
1001206598
METRO-MH
LIGHTING TOWER CONTROL PANEL
STANDARD METRO-MH MODULE
The Metro-MH control panel consists of
a IWE electronic module to control the
engine genset and two-way switches
and buttons to control lighting tower
mast movements.
The ENABLE switch must remain
depressed to allow the mast to
raise/lower or for the lighthead to rotate
or tilt.
LIGHTS-OFF Button
LIGHTS-ON Button
MAST LIFT Switch
ROTATE LIGHTS Switch
TILT LIGHTS Switch
STANDARD METRO-MH MODULE
The DSE 3000 series module allows the
operator to start and stop the engine-
generator set as well as transfer the load.
The DSE 3000 module monitors the
engine, indicating the operational status
and fault conditions, automatically shutting
down the engine with true first-up fault
condition of an engine failure. The LCD
display indicates the fault.
STOP/RESET
places the module
into its
Stop/Reset
mode.
This
will
clear
any
existing
alarm
conditions. If the engine is running and the
module is in the Stop mode, the module
will automatically instruct the changeover
device to unload the generator, and shut-
down the engine.
Remote Start is not possible in Stop mode.
AUTO MODE (NOT USED)
START
Pressing this button in the auto-
mode will start the engine and will
run the engine off-load. Pressing this
button on the STOP/RESET mode will turn
on the CAN engine ECU. (when correctly
configured and fitted to a compatible
engine ECU).
PAGE
Scrolls the display to show the
various instruments.
2
3
7
5
4
6
1
3
2
1
4
5
6
7