SECTION 6 - JLG CONTROL SYSTEM
6-2
31215031
Connect JLG Control System Analyzer
1.
Connect four pin end of cable supplied with hand-held
or wireless analyzer to controller module on platform
box or at controller module inside ground control box.
Connect other end of cable to analyzer.
NOTE:
The cable has a four pin connector at each end of the cable;
the cable cannot be connected backwards.
2.
Power up the Control System by turning the lower key to
the platform or ground position and pulling both emer-
gency stop buttons on.
Using the Analyzer
With the machine power on and the analyzer connected prop-
erly, the analyzer will display the following
.
HELP:
PRESS ENTER
At this point, using the
RIGHT
and
LEFT
arrow
keys, you can move between the top level menu items. To
select a displayed menu item, press
ENTER
. To cancel a
selected menu item, press
ESCAPE
; then you will be
able to scroll using the right and left arrow keys to select a dif-
ferent menu item.
Go to
Discount-Equipment.com
to
order your
parts
