SECTION 4 - BOOM & PLATFORM
4-14
31215031
3.
Take new bracket and install bracket center pin and
snap ring. Repeat on other bracket if replacing it.
NOTE:
Ensure snap rings are seated in pin groove and closed
properly.
Replace Moving End Brackets
REPOSITION CABLES AND HOSES. KEEP COVERED DURING GRINDING TO PRE-
VENT DAMAGE.
1.
Remove existing pins and center rivet. Remove rivet as
shown in link removal instructions on page 4-20. Repeat
on other bracket if replaced.
Correct
Incorrect
Go
to
Discount-Equipment.com
to
order
your
parts
