DIP switches 7 and 8 are used to select the operation mode:
Mono Mode
SW7 ............... Off
SW8 ............... Off
Stereo Mode
SW7 ............... On
SW8 ............... Off
Quad Mode
SW7 ............... Off
SW8 ............... On
Setting Up the Mixer
The DAFV
2
controls the mixer using MIDI commands.
The digital mixer usually needs to be set up to receive MIDI commands.
The procedure for doing this is different for each mixer.
Generally speaking, you usually go to a “MIDI Setup” page, and turn MIDI Receive
“ON”. You must usually also set the “MIDI Channel” to “Channel 1.” On some
mixers you must also set the “communication speed”, and the “communication port.”
Below are some specific notes for the supported mixers regarding settings that must be
made on the mixer to allow the mixer to be controlled by MIDI commands.
Panasonic DA7
Select the MIDI Setup screen.
Set Gen. Rx to MIDI.
Ctrl.l hg Rx ON.
System Ex Rx ON.
Yamaha 02R (not 02R96)
Select the MIDI Setup screen.
Set Receive Channel to 1.
Enabled Parameter Change.
(See page 159 of the 02R owner’s manual for more information).
11
