|
Fathom SA
-600W
Page 24
SA-600W REAR CONNECTIONS
PRE-AMPLIFIER
L
R
OUTPUTS
R
L
SATELLITE AMPLIFIER
TO SATELLITE
SPEAKERS
(L)
(R)
+
–
+
–
SPEAKER OUTPUTS
L
R
INPUTS
SYSTEM CONNECTION DIAGRAM 3:
One SA-600W to
Two-Channel Audio System
The SA-600W is great for use in two-
channel audio systems due to its onboard
high-pass crossover.
Using RCA-type cables, connect the
Left and Right stereo outputs from your
preamp to the “LINE INPUTS” of your
SA-600W. This feeds a full-range stereo
signal into the amp.
Next, connect the Left and Right
“HIGH PASS OUTPUTS” from the
SA-600W to the Left and Right inputs
of your satellites’ stereo power amplifier.
This will feed a high-passed filtered signal
(bass removed) to the Left and Right
speakers. Removing the bass burden from
your satellites will greatly enhance their
performance. See the XO discussion on
page 21 for additional info.
Now that your equipment is
connected, refer to pages 28-31 and follow
the directions for RECOMMENDED
STEREO SYSTEM SETUP
PROCEDURES.
WARNING! TURN OFF THE SA-600W AND ALL OTHER EQUIPMENT IN THE
SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
WARNING
