|
Fathom SA
-600W
Page 18
HOME SCREEN & USER INTERFACE CONTROLS
The SA-600W’s electronic user interface is controlled using the Home Button,
LCD Display and 5-Way Control Pad located on the front panel. Designed to be
simple and intuitive to use, all onboard adjustments can be made quickly and easily,
with just a few button presses.
All settings are accessed from the main Home Screen, with main menu options
appearing on the display while the SA-600W is powered on. You may return to the
Home Screen from any location within the interface by pressing the Home Button,
(located to the left of the LCD Display) to go back one step with each press.
The 5-Way Control Pad is to the right of the LCD Display. It consists of Up, Down,
Left, Right direction (arrow) keys, with a center Enter key. Generally speaking, use
the arrow keys to move/highlight your selection and then press the Enter key to
confirm your choice or access for further options.
Note: When settings are configured from their default state, the text of the
selected item and its main level option (except SYSTEM), will turn YELLOW to
indicate active mode.
USER INTERFACE IN DETAIL
SYSTEM
“SYSTEM” configures how your SA-600W is activated when the “Power” switch
is set to “auto” and allows access to the onboard equalizer settings.
auto mode options include:
12V OFF (default): Activates via Audio Signal Sensing
12V ON: Activates via “12V Trigger - In”
(see Power Switch on page 12 for detailed info)
Box EQ: This feature allows you to activate a preloaded EQ curve designed to
optimize the performance of a JL Audio subwoofer system. Simply select the
custom equalizer setting for your specific JL Audio subwoofer and enclosure. If
you are using a non-JL Audio subwoofer, you may select the “No EQ” option and
use the SA-600W’s 3-band EQ feature (page 21) to apply equalization, as needed.
System Reset: This feature allows you to quickly return all settings back to
a default state (Off/Uncalibrated). Selecting “CONFIRM RESET” will erase
all saved configurations from the SA-600W’s intenal memory and perform
a software reset. Note: If your SA-600W’s GAIN setting was previously
configured to variable (VAR), performing a System Reset will cause it to
revert to its default, Reference (REF) configuration. This may result in an
unexpected loud burst after the SA-600W’s software reset is complete.
Selecting “SYSTEM” will also list your SA-600W’s technical data at the bottom
of the LCD display. This information could be relevant in case your SA-600W
requires service.
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
12V ON
System Settings
12V OFF
Box EQ
V5.15 X144
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
180 deg
Sub Polarity
0 deg
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ON
Delay
OFF
ON
DARO
OFF
Uncalibrated
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ON
DARO
OFF
Uncalibrated
Calibrate
Clear DARO
VAR
Gain
REF
0.0
dB
0.0
dB
ON
ELF Trim
OFF
0.0 dB
ON
Equalizer
OFF
SAVE CHANGES
CANCEL CHANGES
EQ 3
EQ 2
EQ 1
EQ Band 1
50.0 Hz
0.0 dB
0.7 Q
EQ Band 2
50.0 Hz
0.0 dB
0.7 Q
EQ Band 3
50.0 Hz
0.0 dB
0.7 Q
24dB
12dB
Crossover
OFF
79.9 Hz
ON
Delay
OFF
HP Out
ms
Sub Out
ms
0.0
0.0
System Reset
No EQ
IWS 8
12V ON
System Settings
12V OFF
Box EQ
V5.15 X144
CONFIRM RESET
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
12V ON
System Settings
12V OFF
Box EQ
V5.15 X144
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
180 deg
Sub Polarity
0 deg
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ON
Delay
OFF
ON
DARO
OFF
Uncalibrated
ELF
HOME
SYSTEM
GAIN
POLAR
DELAY
DARO
XO
EQ
ON
DARO
OFF
Uncalibrated
Calibrate
Clear DARO
VAR
Gain
REF
0.0
dB
0.0
dB
ON
ELF Trim
OFF
0.0 dB
ON
Equalizer
OFF
SAVE CHANGES
CANCEL CHANGES
EQ 3
EQ 2
EQ 1
EQ Band 1
50.0 Hz
0.0 dB
0.7 Q
EQ Band 2
50.0 Hz
0.0 dB
0.7 Q
EQ Band 3
50.0 Hz
0.0 dB
0.7 Q
24dB
12dB
Crossover
OFF
79.9 Hz
ON
Delay
OFF
HP Out
ms
Sub Out
ms
0.0
0.0
System Reset
No EQ
IWS 8
12V ON
System Settings
12V OFF
Box EQ
V5.15 X144
CONFIRM RESET
FUSE
FUS
E
Warranty void if serial number is removed, altered or defaced.
120 V ~ 60 Hz
F 6A H 250V
FUSE
FUS
E
Warranty void if serial number is removed, altered or defaced.
120 V ~ 60 Hz
F 6A H 250V
