Page 23
|
Fathom SA
-600W
SYSTEM CONNECTION DIAGRAM 2:
Multiple SA-600Ws to
Home Theater Receiver or
Home Theater Preamp/Processor
Multiple SA-600Ws can be connected
in a single home theater system when Bass
Management is provided by the receiver
or preamp/processor. (SA-600W crossover
set to OFF.)
Most home theater receivers and
preamp/processors provide a single
(mono) subwoofer output. Using RCA-
type cables, connect the mono subwoofer
output to the Left or Right “LINE INPUT”
of the first SA-600W.
Connect the “HIGH PASS OUTPUTS”
from the first SA-600W to the “LINE
INPUTS” of the second SA-600W.
Subsequent SA-600Ws will be connected
in the same manner.
Now that your equipment is
connected, refer to pages 32-35 and follow
the directions for RECOMMENDED
HOME THEATER SETUP
PROCEDURES.
PRE-AMPLIFIER
SUB
REAR
REAR CENTER
FRONT
FRONT
R
L
PRE OUT
RECEIVER / PROCESSOR
SA-600W REAR CONNECTIONS
SA-600W REAR CONNECTIONS
WARNING
WARNING! TURN OFF THE SA-600W(S) AND ALL OTHER EQUIPMENT IN
THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
