|
Fathom SA
-600W
Page 22
SYSTEM CONNECTION DIAGRAM 1:
One SA-600W to
Home Theater Receiver or
Home Theater Preamp/Processor
Most home theater receivers and
preamp/processors provide a single
(mono) subwoofer output. Using RCA-
type cables, connect the mono subwoofer
output to the Left or Right “LINE INPUT”
of your SA-600W.
Now that your equipment is
connected, refer to pages 32-35 and follow
the directions for RECOMMENDED
HOME THEATER SETUP
PROCEDURES.
PRE-AMPLIFIER
SUB
REAR
REAR CENTER
FRONT
FRONT
R
L
PRE OUT
RECEIVER / PROCESSOR
SA-600W REAR CONNECTIONS
WARNING! TURN OFF THE SA-600W AND ALL OTHER EQUIPMENT IN THE
SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
WARNING
