JKEXER VIGOR 736, Owner'S Manual

Page: 17 / 24

When the machine starts but computer could not read the signal from sensor for 7 seconds, E1 will be
shown on the computer.
If any above trouble happens, please consult the distributor.
E6 (Error 6):
When the incline motor starts but computer could not read VR figure from incline motor for 6 seconds,
E6 will be shown on the computer.
If any above troubles happen, please consult the distributor.
SMELL
If any smell comes out from motor, please firstly spray out some silicone on the running board (Please
refer to page : RUNNING BOARD MAINTENANCE), and see if the situation improves. Then consult
the distributor for necessary help.
HOW TO START THE MACHINE
STEP 1:
TURN THE MASTER POWER SWITCH ON
STEP 2:
PLACE SAFETY KEY ON THE COMPUTER
STEP 3:
NOW YOU CAN PUSH THE START BUTTON ON THE COMPUTER TO START EXERCISING.
COMPUTER ANGLE ADJUSTMENT
Loosen the knob at the back side of computer and adjust
the computer to a proper angle to get the best viewing for
the runner then tighten the knob to fix it.
HOW TO FOLD UP FOR STORAGE
Lift the rear end of the frame to the computer till you hear
a "CLICK" sound then push and pull it to make sure
the frame is fixed.
E1 (Error 1):
ERROR MESSAGE & TROUBLE SHOOTING
14