background image

USER'S MANUAL

Model No. PETL54020  

Serial No. 

www.iconeurope.com

Visit our website at

Part No. 182987 R0802A

Printed in USA © 2002 ICON Health & Fitness, Inc.

PROFORM is a registered trademark of ICON Health & Fitness, Inc.

ORDERING REPLACEMENT PARTS

To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: 

ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK

Tel: 

Fax: 0 (044) 113 387 7125

When ordering parts, please be prepared to give the following information:

• The MODEL NUMBER of the product (PETL54020)

• The NAME of the product (PROFORM

®

6.5Q treadmill)

• The SERIAL NUMBER of the product (see the front cover of this manual)

• The KEY NUMBER of the part(s) (see the PART LIST and the EXPLODED DRAWING attached in the 

centre of this manual)

• The DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING attached in the 

centre of this manual).

08457 089 009

CAUTION

Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.

QUESTIONS?

As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:

Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS118JG 
UK

email: [email protected]

08457 089 009

Serial Number

Decal

Summary of Contents for 6.5Q











Reviews: