JKEXER VIGOR 736, Owner'S Manual

Page: 18 / 24

5. Observe the tracking of the belt for about two minutes. Repeat Steps 3, 4, and 5 as needed.
HOW TO FOLD DOWN FOR EXERCISE
There is a safety pin on the frame. To fold down the frame,
please hold your hand on the frame and use your foot to
push at the center of air shock (as photo shown) then lean
down the frame into the ground.
HOW TO MOVE
There are two wheels on the frame, just fold the frame up, then tilt the frame for moving.
WARNING:
TO AVOID ANY DANGER HAPPENS TO CHILDREN, PLEASE NOTE:
1. DO NOT ALLOW CHILDREN TO USE THE MACHINE ALONE.
2. TURNING OFF MASTER POWER SWITH AND UNPLUG POWER CABLE FROM OUTLET WHEN
NOT IN USE.
3. FOR SAFETY REASON, ALWAYS KEEP THE CHILDREN AWAY FROM FOLDING AREA
ALIGNING THE RUNNING BELT
Ensure the running belt is centered on your treadmill at all times. Running style and Non-level surface
are two instances which may cause the belt to drift off center. Minor adjustments to the two bolts at
the front of the treadmill are necessary when the belt has drifted off center. See fig. A & B.
1. Press the Master Power Switch (located at the front of the treadmill) to ON position and ensure
Safety Key is properly placed onto the computer console, press the START button to begin running
belt, then increase the treadmill's speed to 3 mph.
2. Stand in front of the treadmill and check to determine which side the belt is shifting.
3. If the belt shift to the left, turn the left adjustment bolt one-quarter of a turn clockwise and the right
adjustment bolt one-quarter counter-clockwise. See Fig. A.
4. If the belt shifts to the right, turn the right adjustment bolt one-quarter of a turn clockwise and turn
the left adjustment bolt one-quarter turn counter-clockwise. See Fig. B.
drifts to the right
FIGURE B FIGURE A
drifts to the left
15