39
SECTION
3
38
SECTION
3
Turn the ringer off by opening the
phone and pressing the volume
button “Down” until "Silent"
appears on the screen. Your phone will
vibrate to alert you to incoming calls.
When the phone is open:
You can send a caller directly to your
Voicemail by pressing the button when
you see “Answer?” at the bottom of the
screen. This will also give an unavailable
message if you do not have voicemail.
Your phone continues to ring until:
• You answer the call.
• The calling party ends the call.
• The call is sent to Voicemail.
Placing a Call
Calling the Jitterbug Operator:
You can ask a Jitterbug operator to connect
you to anyone on your Phone List, or any
phone number in the U.S. or Canada.
1. Press the
button.
The "Calling Operator"
message appears on the screen,
as shown.
2. When the Operator answers,
the "Connected to Operator"
message appears, as shown.
Tell the "Operator" the name
of the person or service on
your Phone List, such as
“Call Susan” or the number you
want.
To end a call or exit any screen and
return to the first screen on your
phone, close it then re-open it.
Calling Non-Phone List Numbers
To call numbers in the U.S. or Canada
that are not stored on your Phone List
or your Call History list, ask a Jitterbug
operator to place the call for you.
If you have security active in your
account, you will be asked for your Personal
Identification Number [PIN].
Connected to
Operator
No to Hang up
114
Calling
Operator
No To Hang Up
NOTE
NOTE
TIP
GH68-085806_Touch_1005_Qx6.qxp 10/12/06 4:58 PM Page 41
