Car door
Push
Pull
click
14
1
2
5
6
7
3
4
Step 6:
As shown in figure 6, insert the
two ISOFIX connectors firmly into the
ISOFIX fixed point in the car seat with a
"clicking" noise. In the meantime, ISOFIX
indication window will become green. In
order to release ISOFIX connectors, push
the green button and the indication
window will become red.
Step 5:
As shown in figure 5, before
insert the two ISOFIX connectors into the
ISOFIX fixed point, ISOFIX indication
window is red.
2. Top Tether Installation for Group I
Step 1:
As shown in figure 1,
make the top tether go through
the middle of car seat headrest.
Step 2:
As shown in figure 2,
open the Side Protection in the
side which is near the door
(Please refer to P8 - The Function
of Side Protection).
Step 7:
As shown in figure 7, one hand
pull ISOFIX Setting Handle and the other
hand push the baby car seat base to make
it fix. Do not need to pull ISOFIX Setting
Handle, when ISOFIX seized up.
Step 3:
As shown in figure 3
and 4, pull out the top tether to
go through the middle of car
seat headrest and hook the
tether anchorage behind (Refer
to the User Manual from
automaker, If necessary, you can
remove the car headrest to make
it easy to install baby car seat).
Step 4:
As shown in figure 5,
tighten the top tether until Top
Tether Adjuster shows green.
Meanwhile, shake the car seat to
check the top tether is tightened
favorably and correctly. If you
want to release top tether, push
the button to make top tether
adjuster revolve some angle.
5
