Pull
19
Group II+III (15-36kg) Installation and Using method
Step 1:
As shown in figure 1,
rotate car seat to forward facing
(Please refer to P8 -The Function
of Rotation). Then, pull the Seat
Position Adjustment Handle to
the level 2.
Step 2:
As shown in figure 2,
one hand pull the ISOFIT Setting
Handle, the other hand press
the ISOFIT connectors into the
base.
1
3
4
ATTENTION:
1. There is only one position level for Group II+III and it is level 2.
2. The installation for Group II+III is forward facing and is applied to children from 15 to 36kg.
3. Before using Group II+III, please remove the 5-point safety belt and cushion.
4. Pull the belt in the buckle tightly to make sure buckle in the right position.
5. Universal Installation is only suitable use in the listed vehicles fitted with 3-point belt and approved to
ECE Regulation No. 16.
6. Semi-Universal Installation is only suitable use in the listed vehicles fitted with ISOFIX anchorages
systems and approved to ECE Regulation No. 16.
1. UNIVERSAL II+III (15-36kg): 3-POINT BELT
Step 4:
As shown in figure 4, have your child sit on the seat and adjust headrest to the
comfortable position. Then make the oblique belt through the guiding hook for Group II
and III, horizontal belt through two harness guiders and insert car belt tongue to car
buckle with click sound. Finally, make sure the lap belt can restrict the position of pelvis.
Step 3:
As shown in figure 3, open the Side
Protection in the side which is near the door
(Please refer to P8 - The Function of Side
Protection).
Pull
Push
click
2
