9
Step 1:
As shown in figure 1,
rotate car seat to rearward
facing (Please refer to P8-The
Function of Rotation). Then, pull
the Seat Position Adjustment
Handle to level 1.
Step 2:
As shown in figure 2,
release ISOFIX connector. Pull
ISOFIX settingkey and ISOFIX
connector will pop up
automatically.
Step 3:
As shown in figure 3, if
you want to remove the ISOFIX,
one hand pull the ISOFIX Setting
Handle, the other hand press the
ISOFIX connectors into the base.
Step 4:
As shown in figure 4,
before insert the two ISOFIX
connectors into the ISOFIX fixed
point, ISOFIX indication window
is red.
ATTENTION:
1. Only suitable use in the listed vehicles fitted with ISOFIX anchorages systems and approved
to ECE Regulation No. 14.
2. The installation for Group 0+I is rearward facing and is applied to children from 0 to 18kg.
3. This car seat for Group 0+I only has one sitting posture and it is level 1.
4. Baby car seat for Group 0+I can not be installed in the position which is equipped with airbag.
5. Important - If your child's weight is lighter than 9kg, you cannot make forward facing
installation.
6. Important - In the driving condition, baby car seat cannot be lateral using.
7. Children less than 9kg need to use 0+ group and 1 group cushion; children between 9-12kg
need to use 1 group cushion without 0+ group cushion; children larger than 12kg do not need
to use 0+ group cushion and 1 group cushion.
1. ISOFIX Installation for Group 0+I
Group 0+I (0-18kg) Installation
(Rearward facing placement)
1
3
4
2
Pull
Push
Pull
Pull
