Page 7 of 25
Note, If the monitor cannot support the device
’s resolution output, it maybe display a
black screen, please refer to the chapter 7 to restore the default resolution setting.
5.2 Network Initialization
At the network initialization phase, show as FIG.5-2, the device will check the local
network connection and the IP settings. After the successful network initialization, the device
goes to auto connecting phase.
FIG.5-2 Network Initialization
Note, if fail to initialize the network, please check the following possible reason:
1) No available cable connection.
2) If the device is set to use dynamic IP address and fail to acquire IP settings from
DHCP server, please check the DHCP services.
5.3 Auto Connecting
If there is none automatic connection setting, the device will skip the auto connecting
phase. Otherwise, the device starts the auto connecting after 5 seconds countdown. You
can cancel the auto connect with
【
Cancel
】
button or
“Esc” key, show as FIG.5-3a and
FIG.5-3b.
FIG.5-3a 5-second Countdown
