manualshive.com logo in svg

JHCTech KMDA-3230, User Manual, Page: 48 / 76

Share
Download
JHCTech KMDA-3230 User Manual Download Page 48

 

 

User’s Guide

 

39 

 

This item shows the information of the BIOS build date and time 

Processor Information 

This item shows the basic information about the currently used processor, including name, type, speed. 

IGFX VBIOS Version 

This item shows the Current VBIOS version of the CPU integrated graphics. 

Total Memory 

This item shows the total memory size of the current motherboard. 

Memory Frequency 

This item shows the current memory operating frequency. 

PCH Information 

This item shows the basic information about PCH, including name, PCH SKU, etc. 

System Language   

Set the language interface of the BIOS.

 

System Date 

Set the date. The format of the date is <week><month><day><year>. 

System Time 

Set the time. The format of the time is <hour><minute><second>. 

3.2.3 Advanced Menu 

This page sets up more advanced information about your system. Handle this page with caution. Any 

changes can affect the operation of your computer. 

 

Summary of Contents for KMDA-3230













































































Reviews:

No comments