JF C-40 S2, Operation & Technical Manual

Page: 26 / 124

26
Below, we suggest some of the most used chopping sizes:
Chopped material purpose
Product Ensilage Daily feeding
Sugar-cane - 4 a 13 mm
Sorghum 8 mm ou maior 6,5 mm
Corn in farinaceous point 3 a 5 mm -
Elephant grass, camerum etc 6 a 17 mm 4 a 22 mm
5.6- Opening limiters adjustment
Note:
Never perform the procedures described
above with the machine operating and/or
without personal safety equipment.
The opening limiters (1) function is to enlarge or to
narrow the ¨way¨ that leads the product (corn or
sorghum) to the pickup drums of the machine, aiming to
reach the most productivity of the corn-cobs or
bunches.
With the machine turned off and the cardan uncoupled
from the tractor, adjust the spacing according to need,
releasing the bolts (1) and moving the limiters (2). After
that, re-tighten the screws (1). See the tables of the
item 12 to find out which wrench and torque you should
use.
1
2