30
24bit Single]; [1366 x 768 18bit Single]; [1366 x 768 24bit Single]; [1440 x 900
18bit Dual]; ; [1440 x 900 24bit Dual]; [1280 x 1024 24bit Dual]; [1680 x 1050 24bit
Dual]; [1920 x 1080 24bit Dual].
LVDS FW Write Protect
Use this item to enable or disable LVDS FW Update/Protect.
The optional settings are: [Disabled]; [Enabled].
►
Memory Configuration
Press [Enter] to view brief information for the working memory module.
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
USB Controller
Use this item to enable or disable this USB physical connector (physical port).
Once disabled, any USB devices plugged into the connector will be detected by
BIOS or OS.
The optional settings are: [Disabled]; [Enabled].
HD Audio
This item controls detection of the HD-Audio device.
The optional settings are: [Disabled]; [Enabled].
[
Disabled
]: HDA will be unconditionally disabled.
[
Enabled
]: HAD will be unconditionally enabled.
[
Auto
]: HAD will be enabled if present, disabled otherwise.
Onboard Lan1 Controller
Use this item to enable or disable LAN1 device or controller.
Wake on LAN
Use this item to enable or disable integrated LAN to wake the system.
The optional settings are: [Disabled]; [Enabled].
Onboard Lan2 Controller
Use this item to enable or disable LAN2 device or controller.
MPEST Slot
Use this item to control the MPEST device or controller.
The optional settings are: [Enabled]; [Disabled].
Speed
Use this item to configure Mini-PCIE device speed.
The optional settings are: [Auto]; [Gen1] ; [Gen2]; [Gen3].
MPE Slot
Use this item to control the MPE device or controller.
The optional settings are: [Enabled]; [Disabled].
Speed
Use this item to configure Mini-PCIE device speed.
The optional settings are: [Auto]; [Gen1] ; [Gen2]; [Gen3].
System State after Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure (G3 state).
The optional settings are: [Always On]; [ [Always Off]; Former State].
