12
2-4 Hardware Installation
Remove the screws that lock the back cover to the system from the back side before
hardware installation procedures (refer to
2-2
).
2-4-1 To Install SO-DIMM
1. Locate the SO-DIMM memory slots on
the board. Insert the gold-figure side of the
compatible SO-DIMM into the slot at a 30
degree and press down.
2. See to it that the notch of the module fit
into the break of the slot; the two plastic clips
will automatically close if the memory
module is fitted in a proper way.
2-4-2 To Install Mini-PCIE Card
Note: The following photos are for illustration only. If you wish to install compatible full-size
card, please install it in Mini-PCIE/MSATA shared slot.
1.
Locate the half-size Mini-PCIE card slot on
the board.
2.
Remove the marked screw and use it to
lock half-size Mini-PCIE card to the slot
in later installation.
